About AMD

Contact/Support

Distributors

Home

1.800.423.3535

1.310.471.8900

Other AMD Sites

Everything for film & digital practices.

Click on general category for more information:

• Sensitometers & Densitometers

• Conventional Radiography Items

• Digital Radiography QA Items

• Mammography QA Items

• Dose Area Product Meters

• Fluoroscopy

• QA Software

• Light Meters

• Cassette QC

• QA Packages

• QA Papers and Reports

• Auxiliary Equipment

Sensitometers and Densitometers

Densonorm 21 Series

r

Go to Top

Densonorm 21 ECO - This is  a 21-step sensitometer and densitometer with measuring arm integrated in one unit. Use the ECO for constancy testing of film processing and measurement of test phantom films. Model 40420

• Product Literature

Densonorm 21 E/E-CAL - This unit is a 21 step sensitometer and densitometer with measuring arm integrated in one unit. The unit calculates and displays LE and LK after the user measures the 21 step wedge densities and base+fog. Use this unit for constancy testing of film processing and measurement of test phantom films. Model 40450

The "E-CAL" version is a  high precision sensitometer calibrated per DIN 6868/55. This unit is also suitable for use for acceptance testing.  Model 40452

• Product Literature

Densonorm 21 i/i-CAL/i-CAL-Lab - This unit is a 21 step sensitometer and densitometer with measuring arm and scanner for automated measurement of 21 step film strips. This unit automatically calculates speed index, contrast index (according to DIN or ANSI), LE, LK, relative speed and average gradient. The unit's memory function stores density values for up to three (3) film strips. A RS-232 interface is provided for connection to a PC or compatible printer. Model 40470

The "i-CAL" version is a high precision sensitometer calibrated per DIN 6868/55. This unit is suitable for use for acceptance testing. Model 40472

The "i-CAL-LAB" version is especially designed for professional laboratory use. Densitometer with highest precision and calibration of 10 points of the measurement range. Motorized measurement of 21-steps with density control. Model 40474

Optional firmware for asymmetric film types is available. this firmware allows automatic measurement of two 21-step wedges of asymmetrical film types followed by automatic calculation of LE and LK, speed index, contrast index (according to DIN or ANSI), relative speed and average gradient.

• Product Literature

Sensitometer Series

r

Go to Top

Sensitometer C  This is a 21 step, dual-spectrum, single-side sensitometer for constancy testing of film processing of blue- and green-sensitive X-ray-films. Model 40170

Sensitometer CAL: high precision sensitometer calibrated per DIN 6868/55. Suitable for acceptance testing of film processing. Model 40172

Sensitometer Cine: especially designed for constancy testing of cine films. Model 40174

• product literature

Densoquick 2

Model 40410

r

Go to Top

Densoquick 2  This is a calibratable densitometer for single point measurements of optical densities of X-ray films.

Densoquick 2i LE This unit has a RS-232 interface. It can measure 21-step wedge densities and Dmin and then automatically calculate LE, LK, relative speed and average gradient. Model 40712

Densoquick 2 TR This unit is especially for measurement of dry laser films, but is also usable for normal X-ray films. Model 40714

• Product literatUre

Normscan

Model 40480

r

Go to Top

Normscan This is a calibratable densitometer with measuring arm and scanner for motorized measurement of 21-step film strips. Normscan will automatically calculate speed index, contrast index (according to DIN or ANSI), LE, LK, relative speed and average gradient. The unit's memory function stores density values for up to three (3) film strips. There is a RS-232 interface for connection to a PC or a compatible printer.

Normscan LAB This unit is especially designed for professional laboratory use. It is a densitometer with highest precision, calibration of 10 points of the measurement range and a motorized measurement of 21-steps with density control. Model 40482

• Product literature

Sensi-Dent

Model 40176

r

Go to Top

Sensi-Dent This unit specially designed unit with a compact dual-spectrum, 5 point pocket sensitometer for constancy testing of dental films. It is also usable for conventional blue- and green-sensitive X-ray films.

Denso-Dent

Model 40430

r

Go to Top

Denso-Dent This is a pocket densitometer for use with the Sensi-Dent.

 ALPHA 6868/3 Test Phantom

Model 40930

r

Go to Top

Test phantom for constancy testing for direct X-ray radiography (without fluoroscopy) per German standard (DIN 6868 Part 3).

 ALPHA 6868/3+4 Test Phantom

Model 40931

r

Go to Top

Test phantom for constancy testing for direct X-ray radiography and fluoroscopy per German standard (DIN 6868 Part 3 and Part 4).

Absorption Filter

Model 40916

r

Go to Top

This is a 25 mm aluminum filter with an insertion frame for mounting near X-Ray tube (generally below the collimator and in the mounting rails provided on the collimator). 

Our filter is also available with an integrated dose detector (compatible with the ALPHA plus dosimeter).  There is also an insertion slot for a finger detector (see product no. 40915)

DIGIRAD A and A+K Test Phantoms

Model 40911

r

Go to Top

These test phantoms are produced according to the German standards (DIN 6868/58 and DIN 6868/13) for acceptance and constancy tests of digital radiography equipment (e.g. storage phosphor or full digital equipment).

With the DIGRAD phantoms you are able to measure all parameters required by these standards, including:

• dynamic range
• contrast resolution
• homogeneity
• spatial resolution (optional)
• position and size of the effective radiation field
• Product Literature

Absorption Filter

Model 40916

r

Go to Top

This is a 25 mm aluminum filter with an insertion frame for mounting near X-Ray tube (generally below the collimator and in the mounting rails provided on the collimator). 

Our filter is also available with an integrated dose detector (compatible with the ALPHA plus dosimeter).  There is also an insertion slot for a finger detector (see product no. 40915).

FLORAD A & D Test Phantom

Model 40932

r

Go to Top

This phantom meets the new DIN 6868-4 2007 standard.

With the Fluorad A+D Test Phantom it is possible to measure the following parameters:

• Dynamic Range

• Contrast Resolution

• Spatial Resolution

• Beam Quality

• Homogeneity

The overall dimensions of the Test Phantom are 200 mm x 200 mm x 18,5 mm. The copper plate is embedded in the phantom's acrylic plate. The acrylic is white so that the light beam can be better observed under spotlight conditions.

• Product Literature

PAS 1054 Mammography Test Phantom

Model 40921

r

Go to Top

The phantom is used for the acceptance and constancy tests of digital mammography exposure equipment per the PAS 1054 standard (as per September 2005). Available in two standard as well as customer-specific configurations:

Standard configuration 1:

PAS phantom for the acceptance and constancy tests consists includes:

• 40 mm basic test phantom with PMMA step wedge

• 40 mm basic test phantom with aluminum step wedge

• structure plate with rotatable 5/6/7/8/10 lp/mm lead line resolution test pattern

• AT+CT-MDP test plate

• PMMA test plate

• HK test plate

• KRV test plate

• 3 x 20 mm PMMA absorption plate

• 1 x 10 mm PMMA absorption plates

• 1 x 6 mm PMMA absorption plate

Standard Configuration 2:

PAS phantom for the constancy test includes:

• 40 mm basic test phantom with PMMA step wedge

• structure plate with rotatable 5/6/7/8/10 lp/mm lead line resolution test pattern

•  CT-MDP test plate (optional AT+CT-MDP test plate)

•  PMMA test plate

•  HK test plate

• 2 x 20 mm PMMA absorption plates

• 2 x 10 mm PMMA absorption plates

Both test phantoms are supplied with a robust transport case.

Optional 20 mm x 24 cm x 30 cm absorption plate is available.

• Product Literature

Phantom DIN 152,7

Model 40936

r

Go to Top

Use this test phantom for quality assurance of all conventional mammography systems.

Suitable for both the constancy test per DIN 6868, Part 7 and the acceptance test per DIN 6868, Part 152.

• Product Literature

DIGMAM Phantom

Model 40937

r

Go to Top

The DIGMAM phantom can be used to perform both the acceptance and the constancy tests of digital exposure units.

The test phantom is equipped with a lead bar resolution pattern with special range (5,6,7,8,10 LP/mm) for digital mammography units.

• Product Literature

EURODIGMAMO  Phantom

Model 40938

r

Go to Top

This test phantom is used for monitoring the technical parameters of mammography imaging systems per the requirements of the "European Guidelines for Quality Assurance in Mammography Screening.

• Product Literature

Resolution Phantom

Model 40934

r

Go to Top

Compression Pressure Meter

Model 40982

r

Go to Top

This compression pressure meter for mammography exposure units is made for the measurement of the annual constancy and accuracy tests of the compression of mammography units as described in the "European Guidelines for quality assurance". The advantages of unit is its easy operation and the accuracy of the measurement results over the complete measure plate. A large LCD display provides easy access to results.

• Product Literature

DAP W1

Model 40940

r

Go to Top

This is a transparent ionization chamber with integrated electronics and internal LCD display.

The DAP W1 is intended to be mounted on the face of the diagnostic X-ray collimator for measuring dose area product or AEP (Area Exposure Product) during diagnostic radiological examinations.

The DAP W1 is especially designed for mounting close to the X-ray tube and is inserted into the guide rails of the collimator. The fixation of the chamber may be done by the user.

Each unit is delivered with either a 176 or 167 mm insertion frame or adapter for additional filters.

• Product Literature

DAP W2

Model 40941

r

Go to Top

Transparent ionization chamber with integrated electronics and external LCD display (single-line).

The external LCD display unit can be installed on the control console and connected to a PC or printer.

See DAP W1 for other features.

• Product Literature

DAP W3

Model 40942

r

Go to Top

Transparent ionization chamber with integrated electronics and external LCD display (double-line).

The external LCD display unit can be placed on the control console and connected to a PC or printer.

Two dose area product meters can be connected. If only one dose area product meter is installed, two of the three parameters dose area product, dose area product rate or time can be displayed.

See DAP W1 for other features.

DAP W4

Model 40943

r

Go to Top

Two transparent ionization chambers with integrated electronics and external LCD display (double-line).

See DAP W3 for other features.

Dosimeters and kVp Meters

ALPHA plus Dosimeter

Model 40922

r

Go to Top

The ALPHA plus Dosimeter is used for constancy testing of X-ray exposure equipment as well as for mammography equipment.  This unit includes LCD, serial interface and plug-in for different detectors. The LCD displays dose, dose rate and exposure time.

• Product Literature

Sensor in Absorption Filter

Model 40916

r

Go to Top

Connects to the ALPHA plus Dosimeter for the constancy test of all analog x-ray equipment (direct radiography and fluoroscopic techniques). Not used for digital or mammography X-ray equipment.

The sensor is located above the patient-equivalent-filter (25mm Al) under the insertion plate.

Energy range: 50kV - 155kV

Effective dose range: 0,1mGy/s - 500mGy/s

Finger Detector

Model 40915

r

Go to Top

Connects to the ALPHA plus Dosimeter for the constancy test of digital and analog x-ray-equipment (direct radiography and fluoroscopy; not for dental or mammography systems).

The units is specifically designed for insertion into the patient-equivalent-filter for use for near-the-tube measurement.  It can also be used as an external sensor.

Energy range: 50kV - 155kV

Effective dose range: 0,1mGy/s - 500mGy/s

Mammography Detector

Model 40923

r

Go to Top

Connects to the ALPHA plus Dosimeter for the constancy test of all analog or digital mammography X-ray equipment.

Energy range: 24kV - 40kV

Effective dose range: 0,1mGy/s - 500mGy/s

Fluoroscopy

Fluorad A+D

Model 40935

r

Go to Top

(Designed according to the new DIN 6868-4 2007)

With the Fluorad A+D Test Phantom it is possible to measure the following parameters:

• Dynamic Range

• Contrast Resolution

• Spatial Resolution

• Beam Quality

• Homogeneity

The overall dimensions of the Test Phantom are 200mm x 200mm x18.5mm. The copper plate within the details is bedded in acrylic glass plates.  The acrylic glass is white so that the light beam can be seen better under spotlight conditions.

• Product Literature

QA Software

PEHAview SCA

Model 40502

r

Go to Top

This is software for the Quality Assurance of Image Display Devices (Monitors) used for diagnostic purposes.  This software is designed in accordance to DIN V 6868-57 and the German QA Guidelines.

• Product Literature

INFOSENS 3.3

Model 40500

r

Go to Top

This is comprehensive software for documentation and evaluation of constancy testing of x-ray film processors as well as for light sensitometry.

The software is designed to work with our Densonorm and Normscan prdocuts for fast and direct input of the 21-step film strip data. It also allows print-out of the monthly charts according the German DIN 6868/2 norm.

Also available as a "light-version" limited to 1-3 film processors.

• Product Literature

MAMMOSOFT 3.3

Model 40501

r

Go to Top

This is comprehensive software for documentation of constancy testing of mammography systems and the associated film processors according to the "European Guidelines for Quality Assurance in Mammography Screening".

Also available as "light-version" limited to 1-3 mammography systems.

• Product Literature

Light Meters

CD Mon

Model 40601

r

Go to Top

Digital Luminance-/Illuminance Meter for the acceptance test and constancy test of viewing boxes and monitors

CD-LUX

Model 40600

r

Go to Top

Digital Luminance-/Illuminance Meter for the acceptance test and constancy test of viewing boxes and monitors

• Product Literature

CD-LUX Plus

Model 40602

r

Go to Top

Includes all the features of the CD-Lux with the addition of a illuminated LCD and rechargeable battery pack (with power adapter)

Delivered without light detector.  Please order detector desired.  Either 40610 - Illuminance detector (lux) or 40611 - luminance detector (cd/m²).  These are additional cost items.

• Product Literature

Cassette QC

Cassette Test Grid

Model 40950

r

Go to Top

For use with normal x-ray cassettes. This includes a test grid for testing cassette film-screen contact. It also includes a 25 mm x 25 mm field to measure the optical density.

• Mesh size: 3.15 mm

• Wire diameter: 0.71 mm

• Dimensions: 420 mm x 450 mm x 6 mm

Mammo Test Grid

Model 40951

r

Go to Top

For mammography cassettes.  This includes a very fine-mesh test grid especially to test the film-screen contact of mammography-cassettes. It also includes a 25mm x 25mm field for measure the optical density.

• Mesh size: 0.5 mm

• Wire diameter: 0.1 mm

• Dimensions: 240 mm x 300 mm x 6 mm

ZVEI-8 Test Plate

Model 40952

r

Go to Top

This is a test phantom to simultaneously check the intensifying factor of x-ray cassette screens. This test phantom includes an easy identification of test film and matching cassette through a marking system and cassette number on each test film.

QA Packages

Of course the contents of each package for the constancy tests are only our suggestions. You may wish to put together your own sets.

Direct Radiography QA Case - For Film Based X-ray - Package "C"

Model 40960

r

Go to Top

This is a complete QA component set to meet your needs for constancy testing of x-ray exposure devices and the subsequent film processing. The case contains all of the instruments and tools needed to perform the tests required by the respective norms, DIN 6868/3, including :

Direct Radiography and Fluoroscopy QA Case - For Film Based X-ray and Fluoroscopy - Package "J"

Model 40961

r

Go to Top

This is a complete QA component set to meet your needs for constancy testing of x-ray exposure and fluoroscopy devices and the subsequent film processing. The case contains all of the instruments and tools needed to perform the tests required by the respective norms, DIN 6868/3 and 4, including:

Digital Radiography QA Case - For Digital X-ray - Package "F"

Model 40962

r

Go to Top

This is a complete QA component set to meet your needs for constancy testing of digital x-ray devices (exposure). The case contains all of the instruments and tools needed to perform the tests required by the respective norms, DIN 6868/13, including:

• DIGRAD A+K Test phantom (DIN 6868/58 + 13)

• CD Lux (basic unit)

• Detector for Light density measuring

• Dosimeter "ALPHAplus" Basic Unit

• "Finger"-Detector

• Absorption filter

• Copper-plate for exposures with 100 kV

• Phantom holder for Bucky wall stand

• Standardized distance plate

• Digital Radiography Forms

• Travel Case

Digital Radiography QA Case - For Digital X-ray - Package "FM" with advanced light meter

Model 40964

r

Go to Top

This is a complete QA component set to meet your needs for constancy testing of digital x-ray devices (exposure). The case contains all of the instruments and tools needed to perform the tests required by the respective norms, DIN 6868/58 and 13, including:

Digital Radiography QA Case - For Digital X-ray and Fluoroscopy - Package "G"

Model 40965

r

Go to Top

This is a complete QA component set to meet your needs for constancy testing of digital x-ray devices (exposure and fluoroscopy). The case contains all of the instruments and tools needed to perform the tests required by the respective norms, DIN 6868/58, 13 and 4, including:

Digital Radiography QA Case - For Digital X-ray and Fluoroscopy - Package "GM" with advanced light meter

Model 40966

r

Go to Top

This is a complete QA component set to meet your needs for constancy testing of digital x-ray devices (exposure and fluoroscopy). The case contains all of the instruments and tools needed to perform the tests required by the respective norms, DIN 6868/58, 13 and 4, including:

Digital Radiography QA Case - For Fluoroscopy - Package "H"

Model 40967

r

Go to Top

This is a complete QA component set to meet your needs for constancy testing of digital fluoroscopy. The case contains all of the instruments and tools needed to perform the tests required by the respective norms, DIN 6868/4, including:

Digital Radiography QA Case - For Fluoroscopy Equipment - Package "HM"with advanced light meter

Model 40968

r

Go to Top

This is a complete QA component set to meet your needs for constancy testing of digital fluoroscopy. The case contains all of the instruments and tools needed to perform the tests required by the respective norms, DIN 6868/4, including:

Digital Radiography QA Case - For Fluoroscopy Equipment - Package "I" without light meter

Model 40969

r

Go to Top

This is a complete QA component set to meet your needs for constancy testing of digital fluoroscopy. The case contains all of the instruments and tools needed to perform the tests required by the respective norms, DIN 6868/4, including:

Mammography QA Case

Model 40963

r

Go to Top

This is a complete QA component set to meet your needs for constancy testing of mammography x-ray equipment (digital or analog). The case contains all of the instruments and tools needed to perform the tests required by the respective norms, including:

• 40 mm Basic Test Phantom with PMMA step wedge

• 6 mm structure plate with rotatable lead line resolution test pattern

• Test Plate KP-MDP (w/o gold-plated mammography detail test objects)

• Test Plate PMMA

• Test Plate HK

• 2 x Absorption Plates 10 mm

• 2 x Absorption Plates 20 mm

• Dosimeter "ALPHAplus" Basic Unit

• Mammography-Detector
• Travel Case

Papers

Quality Assurance in Radiology

Model 40970

r

Go to Top

This is a brochure for Quality Assurance in Radiology. In this 100 page document you can learn the basics of sensitometry, x-ray Films, intensifying screens and film processing. The main focus of t his document are Acceptance- and Partial Acceptance Tests, Constancy Tests and Functional Tests. The paper includes many diagrams, charts and examples for better understanding. In addition Quality Assurance in Film Viewing Equipment and Image Display Equipment will be explained.

The appending PDF-File shows the first pages of the brochure in German and English.

• Product Literature

Auxiliary Equipment

11-Step Wedge

Model 40975

r

Go to Top

This is a 11-step aluminum wedge for determining the shape of the sensitometric curve, speed and mid-gradient of x-ray screen-film systems for medical radiography.

The step wedge consists of 11 steps with a width of 12 mm each. The height of the first step is 5 mm, following steps are graduated by 3 mm. Total dimensions (HxLxW): 35 mm x 132 mm x 50 mm.

21-Step Wedge

Model 40976

r

Go to Top

This is a 21-step aluminum wedge for determining the shape of the sensitometric curve, speed and mid-gradient of X-Ray screen-film systems for medical radiography.

The step wedge consists of 21 steps with a width of 11 mm each. The graduation is 1.5 mm per step. Lead numbers mark every step. Total dimensions (HxLxW): 31,5 mm x 230 mm x 112 mm.

Mammography Step Wedge

Model 40977

r

Go to Top

This is a 21-step aluminum wedge for determining the shape of the sensitometric curve, speed and mid-gradient of mammography x-ray film.

The step wedge consists of 21 steps with a width of 5 mm each. The graduation is 0.3 mm per step. Total dimensions (HxLxW): 6,3 mm x 105 mm x 10 mm.

Spacer Set

Model 40912

r

Go to Top

This is a spacer plate with adjustable legs for positioning the DIGRAD test phantom near the x-ray tube on units without insertion slots on the x-ray collimator (e.g. over-table / under-table tubes, C-arms etc.).

Pumpfix

Model 40980

r

Go to Top

This is an electrical pump for quick transfer of x-ray and repro chemicals (e.g. developer, fixer). The Pumpfix is an ideal helper for rapid and clean refilling of film processors with fresh solutions. Includes a safety transformer.

Phantom Holder

Model 40913

r

Go top

Phantom holder for DIGRAD test phantom for mounting on bucky grid wall stands.

Thermometer

Model 40981

r

Go to Top

This is a digital mini-thermometer with measurement tip of rust-free, stainless steel to check the developer temperature during quality control of film processing.

• Measurement range: -50°C - 150°C

• Indication increments: 0.1°C

(c) 2011 AMD. All rights reserved                   Privacy Policy                    Doc. No. 340-4-225 (2010)